T-1805 Ppd for Diesel Fuel

• Customization: Available
• Application: Industrial Lubricant, Automotive Lubricant
• Type: Lubricant Additive
• Model NO.: T-1805
• Composition: Additives
• Transport Package: 170kg/Drum
• Specification: API
• Trademark: Synshine
• Origin: China
• HS Code: 38112100
• Production Capacity: 3000mt/Year

Product Description

                                                    T-1805 PPD for Diesel Fuel

DESCRIPTION
This amide copolymer is synthesized by free radical polymerization of three monomer units. It improves the low-temperature mobility of diesel, by effectively dropping their condensation point. It has notable effect on catalyzing diesel oil, but also well for thermal cracking diesel engine oil. It's also effective on straight distillate diesel fuel, wide-cut diesel fuel and narrow-cut diesel fuel. A small dosage in the blending process can produce qualified low-temperature performance of diesel fuel No. 10, No. 5, No. 0, No. -10, No. -20 and No. -35. This product can be used in producing lower viscosity number diesel fuel from high viscosity number products, for example from No. 0 to No. -10, from No. -10 to No. -20, bringing more benefit to the refineries. During the production process, adding an appropriate amount of this product can improve the yield of diesel oil, increase diesel production and reduce the cold filter plugging point by 5-10 °C, and freezing point by 10-30 °C. Practical dosage should be based on evaluation results.
Reference dosage

TEST	SOLIDIFICATION POINT, °C
Diesel Sample from Sinopec	4
T-1805 Dosage 0.05%	-2
T-1805 Dosage 0.08%	-4

SPECIFICATION

ITEM	Typical data	TEST METHOD
Appearance	Light Yellow Transparent Semisolid	Visual
Kinematic Viscosity(40°C), mm^2/s	≤300	GB/T265
Freezing Point, °C	≤30	GB/T3535
Density(20°C), kg/m^3	850-950	GB/T1884

storage
The product should be packed, marked, stored, transported and accepted on delivery according to SH/T0164. The highest temperature should not exceed 75 ºC. It is nonflammable, non-explosive and in-corrosive. For long term storage, the temperature should not exceed 45 ºC.

PACKAGE
170KG per 200L steel drum; 13.6MT per 20ft container

OUR COMANY
Jinzhou Xinxing Petroleum Additive Co.,LTD,established in 2002,which been dedicated itself to R&D lubricant additive more than 20 years .
Synshine as a well-known professional lubricant additive enterprise,which play an inportant role in the rejuvenation of China's lubricant additive industry. Our new Plant-Jinzhou Wan Xing Yuan Lubricant Additive CO.,LTD.,located at Tanghezi Economic Development Zone,year capacity at 100000MT,which include additives for Engine Oil,Industrial Oil and other Chemical Accessories. 

OUR PRODUCTIVITY POWER
The production capacity of ash free dispersant is 15 thousands tons, with a single batch discharge of about 20 tons. It mainly consists of ash free dispersant series such as T151, T154, T161, as well as boronized products. The thermal addition method is used, and compared with the chlorination method, the products do not contain chlorine, making them more environmentally friendly. During the production process, monitoring and analysis are carried out in the central control room to constantly grasp the product status of each production link, such as basic indicators such as acid value, alkali value, viscosity, moisture, etc.

The blending capacity of the composite agent is 3-4 tons per year, ranging from 25 cubic meters to 3 cubic meters. Different kettles can be selected for blending according to demand, from automotive oil to industrial oil, achieving specialized kettles for specific use.
OUR LAB
The laboratory has an area of over 300 square meters and is equipped with advanced exhaust and alarm control systems. The experimental platform uses ceramic counter tops, which can be considered high-end products. The laboratory has the ability to fully analyze single agent composite indicators, such as acid-base, anti foaming, copper corrosion, elemental analysis, etc. There are also some performance testing methods, such as simulating crankcases, corrosion, water separation, etc. Equipment such as ICP, salt spray, rotary oxygen bomb, CCS, etc., striving towards CNAS.
 

OUR MISSION
"Build Excellent Quality,Create National Brand"is oue enterprise purpose,we endeavour to serve our domestic and foreign customer with high quality additives and will surely lead to more spectacular and advance technical achievements in Chinese additive industry and build a domestic lubricant production base with leading technics.